Finned heater element has good heat dissipation or cooling effect, high temperature-raising, Finned air heater is available in straight lengths or bent as per customer's requirement with threaded stud connection at both ends. It has enlarged surface area. We offer our range at market leading prices.

Rectangle Finned Heating Element avoids the direct contact between steel pipe and air, and the anti-corrosion property has also been effectively improved.Because the fin has no fold, the air resistance is lower than the winding type.Steam heater products also have the advantages of not easy water, easy to clean, compact structure, large heat transfer area per unit.

Intermittent use of daily maintenance: long-term idle, if the insulation resistance is less than 1 megohm, can be dried in the oven at about 200 degree , or reduce the voltage directly connected to electric heating, until the insulation resistance returns to normal.

1. Paint room volume (cubic meters)

For example, the length, width and height of the paint room are 6.5*3*2 meters, then its volume is 39 cubic meters.

2. Temperature difference

For example, from 20 degrees to 60 degrees, the temperature difference is 40 degrees.

3. Time

How long does it take to heat a 39 cubic meter paint room from 20 degrees to 60 degrees? Like 40 minutes.

So it can be estimated that the total power required for this painting room is about 120KW.

It is known above that the power required for the 39-cube paint room is about 120KW, but for such a large power, we must make the finned heater elements for the paint room seperately to make it evenly arranged in the inside of the paint room. In this way, it can be heated evenly and ensure that the drying speed of the paint is the same.

According to our design experience, most customers use straight type finned heater, so that installation and wiring are convenient. It can be seen from the above that the length of the paint room is 6.5 meters, the width is 3 meters, and the height is 2 meters, so we can install the finned air heater for the paint room on two sides of 6.5*2 meters and a bottom surface of 5*3m.

As the temperature of the paint room is not high, the tube material of the special heating element for the paint room can be made of 304 stainless steel with a temperature resistance of 300 degrees. At the same time, it should be noted that there will be moisture in the paint room, so the fins and fasteners should also be made of 304 stainless steel, which will be resistant to oxidation and make the service life of the finned heater element longer.

Industrial field.Plastic industry; Foundries; Packaging industry; Engineering industry; Medical & laboratory equipments; Industrial ovens; Powder coating plants; Domestic appliances; Air conditioning systems; Recirculating drying ovens; Forced air duct heating; Duct heating; Textile machinery; Corrugating paper industry.Finned Tubular Heater Tubular Finned Air Heaters with good heat dissipation or cooling effect, high temperature-raising, It is available in straight lengths or bent as per customer's require...

গরম ট্যাগ: